Line stage 03
Drying
The Drying stage provides its equipment action and handoff within the line for new, expanded, or upgraded projects.
Equipment and interfaces for this stage
See this equipment stage's role in the line and the interfaces to confirm with the work before and after it.
When water remains at the base, finish, or inner wall after rinsing, the hot-air route depends on where it remains, container material, and available dwell time.
Show residual water and discharge orientation, and provide container dimensions, adjacent line rates, available heat source, and the acceptable container-exit temperature check.
Equipment in the supplied folder
Start with the equipment routes actually documented for this stage.
The names and roles below come from the supplied line-process folder. They are equipment routes to compare, not confirmation that they fit your product, pack, or required rate.
- Multi-track drying machine.
- The supplied folder places this equipment between rinsing and filling for container drying.
Source: 3.烘干/Blow多轨道式烘干机/产品说明、产品特点.docx
Confirm the equipment and site interfaces for Drying.
This stage can be confirmed around infeed, outfeed, utilities, and site handoffs. To apply it to a specific project, add surrounding equipment, conveyor height, package samples, target rates, fault handling, and a dimensioned layout.